Gather all the materials to get started on your apron.

You can use fabric or a newspaper to make a template for your apron.

Grab a marker or tailor's chalk and mark the measurements for your apron on the fabric (25" x 4" x 9"). Cut the fabric accordingly, and you will have your template.

Next, fold the main fabric in half, with the right sides facing inward. Line the template with the fabric and secure them together with sewing pins. This will ensure that the fabric will not move while you work.

Grab a marker and draw an outline along the template.

Next, draw an inch-wide seam allowance around the outline you just drew. Remove the template and set it aside.

Grab a pair of scissors and cut along the outer liner.

Open the fabric with the right side still facing down. You should see the outline and seam allowance you made on the right-hand side of the material.

Place your fabric template over the left side of the main fabric and draw a mirroring outline and seam allowance on the left-hand side.

Next, roll or fold the hem inward and line the edges with the inner outline. Pin it in place to secure it as you work your way around the entire apron. You can also iron the hem to give you clean and precise edges.

Cut out four strips of cotton ribbon, each 30 inches long, for the straps.

Fold the ends inward twice and then secure them to the apron with sewing pins. You will need two at the neck and two at the sides to tie around the waist.

Finally, use your sewing machine to sew the hems shut and secure the straps firmly.

Your apron is ready to wear!