Gather all materials.

Start by drawing a line across one of the narrow sides of the cereal box, about 1/2 inch from the top.

Turn to the opposite narrow side and draw a line 4-inch away from the bottom of the box.

Turn the box to the wide side and draw a diagonal line to connect the top and bottom lines you have previously drawn along the sides.

Do the same on the opposite side.

Use a knife to cut along the lines, creating a magazine holder shape.

Grab your self-adhesive fablon, and measure and cut an appropriate length and width to cover the entire box.

Peel off the backing adhesive and start wrapping around the box, ensuring all sides and corners are covered.

Use a ruler to smoothen out air bubbles, if any.

Grab your cutter and cut the excess wrapping paper of your box.

Use a small pin or needle for popping out any small air pockets remaining after gluing.

There you go, a decorative, inexpensive DIY magazine holder!